CONNECTED magazine n°12
A new REDEL production site is inaugurated!
The new REDEL 2 production site, at 400m from the main site (St-Croix, Switzerland), was officially inaugurated on 3rd September 2020. +34% REDEL production surface area, 7038m2+16% REDEL staff, 157, of which 44 people at REDEL 2.
LEMO magazine CONNECTED n°14
The 14th issue of LEMO's CONNECTED magazine is out!Connectors to combat the virusThe urge to breatheAt the heart of the Dakar rally
LEMO’s new HARPOON: Press fit contacts for elbow and straight PCB sockets
LEMO connector is well known for its Push-Pull connector. LEMO’s new harpoon earthing pins enable pre-installing easily various receptacles/socket.The advantage of these new press-fit contacts is the gain of time while doing the pre-assembly, no need to place the washers and screw 4 times the M1.6 screws.Simply align the connector and push firmly. This pre-assembly will enable the assembly house o
LEMO and ROVENSO have teamed up during the Robotics Challenge of the International Atomic Energy Agency
LEMO has been supporting Rovenso, a Swiss startup, who was a finalist of the Robotics Challenge of the International Atomic Energy Agency. The event was held in Brisbane Australia. The goal of this challenge was to identify robots that will assist IAEA inspectors in carrying out their tasks. More specifically, repetitive measurement and stock identification tasks in harsh environment areas exposed
New Connector for Industrial Control Equipment
LEMO has recently filed 2B series for UL 508A. These requirements cover industrial control panels intended for general industrial use, operating from a voltage of 1000 volts or less.
WRIGHTSPEED DRIVES FOR ECO- FRIENDLY URBAN JUNGLES
Nitrous oxides, hydrocarbons, particulates, brake dust and noise pollution: heavy-duty diesel vehicles, such as delivery trucks or buses are a nightmare for modern cities.